ATIFlash 4.17
ATI|AMD graphic cards BIOS tool for DOS
Updated: 2013-11-28
3.79
– Fix issue with flashing Atmel AT25F512B ROMs
3.78
– Fix issue with flashing SST ROMs
3.77
– Fix -mb flag for Evergreen series asics when modifying SSID and SSVID
3.76
– Add support winbond W25X80A
3.75
– Add “-lockrom” and “-unlockrom” in Atiflash to lock rom for protection
3.70
– Fix: correctly report flash error code under linux
– Fix: correctly detect PCI devices under linux
– Fix: – Fixed segumentation fault when doing -pa -pavbpn on a gfx card with an invalid vbios part number
3.67
– update RV790 DID
3.66
– update BN number to 128
3.65
– Add RV740
3.64
– Fix Flash on AT25FS010N
3.63
– Add New ROM support for Atmel AT25FS010N
3.62
– Fix the save function to save bios > 64K
– Fix the RV710 flash BIOS configuration to ensure it didn’t triggle CTF
3.61
– Fix mb option to save the entire rom size if rom size is bigger than bios size
3.60s
– Add support for RV710
3.60
– Use SCLK to flash BIOS on RV730 only (SCLK will be scaled down while flashing the BIOS)
3.59
– Add RV730 support
3.58
– Fix pa paramter, synchronize the same behaviour as ATIWinFlash
3.57
– Add R700 Support
– Reduce size
3.56
– Fix corrupted zip file. Same release as 3.55
– Add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
– Add partial check for -pavbpn
3.54
– Add “nw” in help
3.53
– Add unique identifier for Ry7xx
3.52
– Add RV770 device ID support
3.51
– Add -AMD flag to allow searching for devices with AMD vendor ID
3.50
– update SPI write sequence to check for both WREN and BUSY bits to be deasserted before verifying the write (solves issues seen with intermittent write failures)
3.49
– update description for RV670 slave devices to identify uniquely on Gemini boards
3.48
– correctly print Old and New P/N when flashing with newer bioses
3.47
– explicitly identify RV635 ASICs
3.46
– Fix problems with GPIO19 asserting the CTF signal on RV670 boards
3.45
– Fix problems with crashes on some systems when flashing onto blank ROMs
3.43
– Added -pavbpn (allows the use of -pa with VBIOS PN)
– Added support for new ROM used by multimedia cards (Quito and Lima)
3.42
– Fix -mb command for Ry6xx
3.41
– Fix Ry6xx SST support
3.40
– Fix RV610 + Rialto hang issue
3.39
– Fix RV610 write issue
3.38
– Add Quito support
3.35
– resolved -i/-ai corruption issue
3.34
-ai now displays full PCI ID information
– ATMEL flash procedurce redesigned for stability/reduced overall flash time
-ai -scansii combination will report SST/ATMEL firmware revision
3.33
– internal release
3.32
– Add flashing over 128KB
3.31
– resolved pak issues with SST/ATMEL
3.30
– update device ID support for RV630/M76 & 0x000 for Ry6xx
3.29
– Add new option -pak to build flash package
3.28
– Add new option -fa to force flashing if the ROM is already programmed
– Add new option -fm to force flashing if legacy memory config mismatch
– Add new option -fs to force flashing if SSID mismatch
– Add new option -fp to force flashing if BIOS P/N mismatch
– Add new command -pa to search and program multiple adapters according to BIOS P/N
– Add new option -padevid to search for adapters of a specific PCI device ID when used with -pa command
– Add new option -passid to search for adapters of a specific subsystem ID when used with -pa command
– Add new option -pasvid to search for adapters of a specific subsystem vendor ID when used with -pa command
3.00
– initial release
No comments