Skip to main content Start reading the article

EVGA prepares P67 FTW B3 motherboard

EVGA will soon launch another FTW series motherboard based on B3 revision P67 chipset.

EVGA will soon launch another FTW series motherboard based on B3 revision P67 chipset. The product deserves to be the ground for a top-performance PC since it has six PCI Express expansion slots. Thanks to on-board NVIDIA nForce 200 chips, the slots get two x16 lines that can run in x8 mode in case of 4-way SLI setups.

The board is design for Intel Core processors with Socket LGA 1155. CPU is power via 12-phase design. Its elements are split into two groups each covered by a separate radiator. Besides that, there are four DDR3 slots as well as two SATA Gb/s and four SATA 3 Gb/s ports.

In addition, P67 FTW B3 comes with 8-channel sound codec, two Gigabit Ethernet adapters and USB 3.0 ports. Hardware enthusiast should be excited since this motherboards supports EVGA EVBot module, voltage measurement, set of jumpers for manual PCI-E slot cutoff, diagnosis indicator and Power/Reset buttons located on PCB surface.

EVGA P67 FTW B3 is estimated to sell at $200.

No comments

Leave a Reply

Avatar