NVIDIA Inspector 1.9.7.2 BETA

Version 1.9.7.2 BETA
===================================================================
– inspector now always requires admin rights since nvidia decided
to accept all overclocking actions just in an elevated process
enviroment for drivers R325 and above. 🙁
===================================================================

– changed MDPS startup to make use of TaskScheduler instead of shortcut
– changed “Create Startup Shortcut” feature for clock startup to make use
of TaskScheduler too ( rightclick “Create Clocks Shortcut” )
(you have to remove your old startup shortcuts manually)

– added lod bias adjustment for OpenGL
– added FERMI_SETREDUCECOLORTHRESHOLDSENABLE as “Antialiasing fix”
to avoid black edges in some games while using MSAA (R320.14+)
– added OverrideDefault property to CustomSettingNames structure
– added total card power level (normalized) to sensor monitoring (R314+)
– changed MDPS to run always in legacy mode but with enabled “add by gpu process” feature

1.9.7.1
– fixed overclocking panel was expanded by default
– fixed divide by zero bug for some mobile kepler cards

1.9.7.0 BETA
– added support for overvoltage (GK110)
– added support for temperature target (GK110)
– enabled and improved estimated max boost for GK110
– added CLI parameter “-setIlumination” for logo brightness control (GTX 690, TITAN; SLIBRIDGE)
– added CLI parameters for overvoltage and temperature target
– improved high dpi layout for driver settings

1.9.6.9
– updated setting constants and names xml for driver R313
– removed dirty workaround for delete profile driver bug, is fixed since R310
– fixed low resolution gui glitch for bitvalue editor
– improved hex input parsing

1.9.6.8 HOTFIX
– possible bugfix for low resolution GUI glitch in setting profiles

1.9.6.7
– improved max boost detection for kepler cards
– added CLI parameter “-skipMaxBoostTest” to disable max boost detection
– added CLI parameter “-disableScan” for profile settings
– added new profile helper while dragndrop exe file and no profile is found (take care you not just took the launcher)
– removed (DX9) postfix for LOD bias setting, its supported for DX10+ too since driver r310

1.9.6.6
– clock domains reworked, fixed some 304.xx issues on kepler
– switched shader to gpu clock for monitoring default selection
– updated some setting constants for 302.xx drivers

1.9.6.5
– fixed wrong bandwidth calculation for GDDR3
– added invalid bios detection
– added some vendorids
– finally fixed trilinear optimization setting 1 = off / 0 = on
– changed prerenderlimit setting for 0 (is now app controlled since 300.xx)
– minor changes in default value handling
– updated some settings constants for 300.xx drivers
– added CLI param “-restartDisplayDriver” (Vista/Win7 only)

1.9.6.4
– added memory bandwidth calculation to memory buswidth display
– fixed baseclock range out of bounds in some cases
– workaround for strange vcore offset on negative base clock offset
– replaced mem usage display by pci-e interface info on main gui
– added max boost clock estimation

1.9.6.3
– added “+” sign for offset values
– added small startup delay for MDPS tray start
– fixed restoreAllPStates to work for offsets as well
– added adaptive vsync flag to custom settings (for 300+ drivers)
– added FXAA to custom settings (for 300+ drivers)

1.9.6.2 (Beta)
– fixed highest voltage offset step was not selectable
– added new functions for voltage and clock reading

1.9.6.1 (Beta)
– fixed home profile button do not work as expected on 300.xx drivers
– added current bus usage to monitoring
– added current power consumption level to monitoring and main gui (kepler only)
– fixed current voltage reading for kepler
– added support for base/boost clock reading (kepler)
– added support for base clock offset (kepler)
– added support for memory clock offset (kepler)
– added support for voltage offset (kepler)
– added support for power target (kepler)
– added CLI params for base, memory, voltage offsets and power target
– fixed MDPS for kepler (no need anyway)